Industrial Timing Belts

About

Timing belts have teeth that engage with a toothed pulley, so the belt and pulley run in time. AIMS Industrial supplies Gates PowerGrip timing belts in HTD, GT3, GT4 and classical sections, Gates Twin Power double sided belts, Synchro-Power polyurethane belts, micro-V custom backed belts and long length belts, plus an Optibelt H profile belt. What's in the range Belt What the range includes HTD (Gates PowerGrip) 3M, 5M, 8M and 14M sections. GT3 and GT4 (Gates PowerGrip) GT3 in 3MGT, 5MGT, 8MGT and 14MGT, including a 339-3MGT-15 3MGT belt. GT4 rubber synchronous belts in 8MGT and 14MGT. Classical synchronous Gates PowerGrip XL, L, H and XH sections, plus an Optibelt ZR 270H100 H profile belt, 685.8 mm long and 25.4 mm wide. Double sided (Gates Twin Power and GTX) Twin Power GT2 in 8MGT and 14MGT, Twin Power HTD 8M, a Twin Power TP section, and a PowerGrip GTX 8MX double sided belt. These are also under double sided timing belts . Polyurethane (Gates Synchro-Power) T5, T10, AT5 and AT10 sections. Micro-V custom backed Gates GT Micro-V custom backed belt in 8MGT and a 1552-S8M-30PK custom backed S8M belt. Long length Gates long length HTD 8M glass cord rubber belt, an HTD 8M 20 aramid cord rubber belt (9308-40395) and a GT 8MR 30 steel cord rubber belt (9396-10050). Choosing a timing belt A timing belt must match the profile and pitch of the pulleys on your drive, so start with the belt section marked on your existing belt or pulleys, for example 8M, 8MGT, T10 or H. Then check the belt length and width you need on the product page. Choose a double sided belt if both faces of the belt drive pulleys, and a long length belt where a standard length will not reach. Always check the data sheet. Confirm the section, length, width and rating suit your drive before ordering. Related ranges The pulleys for these belts are under timing pulleys and pulleys . See also single sided timing belts , double sided timing belts , Poly Chain belts , belts , sprockets and idler pulleys . Br