Honeywell Security Expansion Modules

About

Expansion modules for the Honeywell Vista Series alarm systems. If you need to add on to any of Honeywell's panels, be they wired or wireless systems, this section is where you'll find the hardware you'll need to make that happen. Honeywell Expansion Modules are used to add extra functionality to your Honeywell Vista series alarm system. For instance if you need more hardwired zones for your system than the initial 6 or 8 that come standard on the control board; you can add either the 4219 Zone Expander or the 4229 Zone Expander . Both of these will add 8 more hardwired zones to your alarm panel but the 4229 has two on-board relays that you can use to trigger external devices on an alarm condition like a siren or a strobe light or to provide resets for smokes. If all you need to add are relays for triggering then you can use the 4204 Relay Board. This is a board with 4 on-board relays for triggering external devices such as sirens, strobes, or resets for smoke detectors. We also carry modules you can use to expand your Vista system with wireless detection devices. We have the 5881ENM which is a wireless receiver for the Honeywell Vista panels that can let you add up to 16 wireless zones. We also carry the 5881ENH wireless receiver and this can let you add as many wireless zones as your panel can handle. The next item we carry is the 5883H transceiver module and this will allow usage of all of the Honeywell wireless devices including those that require an RF House code to operate. We also have the 5800RP which is a wireless repeater module and this can be used if you're experiencing local interference causing interruption of the wireless signal or if you need to extend the range so you can place wireless devices out further than the standard 200 ft radius. Another module customers use often is the A12612 add-on power supply board. This is used if you are going to be drawing more than the 600 mA that the main control board provides. This requires its own transformer,