PARART™ 3D Puff Heat Transfer Vinyl

About

Add a fun 3D look to any design 3D Puff HTV is available in over 30 colours — the most puff colours in the industry. It's easy to use: you only need to press once to get the puff effect. It weeds easily, and its pressure-sensitive carrier allows for repositioning. Available in Standard, Metallic, Glitter, and Glow In The Dark. Applies to: cotton, uncoated polyester, fabric blends, polyester/acrylic, and similar fabrics. Not suitable for nylon. Application instructions Cutting (all types) Blade: 45° Cut the puff vinyl side up. Do not cut through the carrier sheet. Mirror your image. Standard and Glow In The Dark Temp: 280–295°F — temperature varies between colour batches, so a test press is strongly recommended. Pressure: strong and firm. 3D Puff needs more pressure than any other HTV we've pressed — a Cricut EasyPress is not recommended. Time: 8–15 seconds Peel: warm Glitter Temp: 285°F Pressure: strong and firm Time: 3–5 seconds to adhere, remove the carrier sheet, then cover and press a further 7–10 seconds Peel: warm Metallic — two-press application Temp: 300°F — run a test press first. Pressure: strong and firm. A heat press is required. Press 1: 3 seconds, then peel the carrier once the HTV is warm. Peeling while hot may lift the vinyl from the garment. Press 2: cover with a Teflon sheet and press again to finish. Also available: Parart Glitter 3D Puff HTV and Parart Dollar HTV . Watch: pressing PARART 3D Puff