Irrigation Valves

About

Irrigation valves control drip and sprinkler zones with dependable, serviceable designs. Shop inline/globe valves for manifolds, anti-siphon valves with built-in backflow protection, and complete drip zone kits with filter and pressure regulation—plus solenoids and repair parts to keep systems running. Shop by need Inline / globe valves: 3/4" and 1" bodies for valve boxes and manifolds; flow-control options Anti-siphon valves: valve + atmospheric vacuum breaker for code-friendly backflow protection (mount above outlets) Drip zone kits: valve + filter + 25–30 PSI regulator assemblies for low-flow drip systems Solenoids: 24VAC coils for wired controllers and 9V DC latching for battery timers Repair parts: diaphragms/bonnets, O-rings, filter screens, flow-control stems, replacement solenoids Quick choosing guide Pick the valve type: use inline valves with a separate backflow device; choose anti-siphon where allowed and where the valve can sit above the highest downstream outlet. Match your controller: 24VAC valves for standard wired controllers; 9V latching valves/solenoids for battery controllers. These are not interchangeable. Size & threads: 3/4" fits most residential zones; 1" for higher flow. Confirm FIP/MIP/slip ends to match your plumbing. Low-flow drip: choose a drip zone kit or a valve rated for low-flow operation to prevent chatter; always add filtration and regulation. Flow control helps: a flow-control stem lets you throttle a zone for tuning and isolate it for service. Plan wiring & protection: use gel-filled, direct-burial connectors and place valves in accessible boxes above standing water.