Instructions

About

Solid colours tech spec Highly pigmented acrylic paint compound Dry-fall powder coating Non-drip, non-dribble formula Suitable for steel, aluminium and carbon-fibre surfaces Permanent and resilient: UV-resistant and weather-resistant Deep matte colours Easily-achieved fading, stencilling and blending effects (see FAQ below) Requires no post-application equipment or heat treatment 400ml can will cover a frame and fork in a single coat Minimum recommended coats: one Instructions for use Ensure surface is clean and dry. Primer is not required in all cases but is recommended. Wear protective gloves, protective clothing, eye/face protection. Always paint in an open space in the open air. Shake can for at least 3 minutes before use (set a timer, it's important). Test spray for 2-3 seconds prior to application. Optimal temperature for spraying: 15-24°C (60-75°F). Do not use Spray.Bike if the temperature is below 13°C (55°F) or above 29°C (85°F), or if relative humidity is above 70%. Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly. Solid colours: spray surface from a distance of 2-4 inches. Frame Builder’s Smoothing Putty, Frame Builder’s Transparent Finish, Frame Builder’s Cold-Zinc, Frame Builder’s Metal Primer, Frame Builder’s Carbon Primer, Frame Builder's Metal Plating: spray surface from a distance of at least 8 inches. Keirin Flake and Keirin Sunlight: spray surface from a distance of at least 12 inches. Frame Builder’s Top Wax: Spray onto a paper towel or soft lint-free cloth and apply gently. When spraying, keep hand moving at all times. Allow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours). Do not use isopropyl alcohol or other strong solvents over paint. Isopropyl can be used on bare steel before primer. At the end, turn can upside down and spray for 2 seconds before storing (this prevents clogging). Protect can from sunlight and temperatures exceeding 50°C/122°F. For a satin or gloss top-c