Tips for Applying Packaged Trims

About

Wrights Packaged Trims: Definitions and Tips for Applying Single Fold Bias Tape: Fabric cut on the bias (at a 45 degree angle) with the raw edges folded under. Used for facings, casings, accent trim. To apply: stitch down at the folded edge on both sides. Double Fold Bias Tape: Fabric cut on the bias (at a 45 degree angle) with the raw edges folded under. The tape is then folded in half slightly off center. Used for binding, facing, accent trim, ties. To apply: fold the tape over the raw edges of your fabric or quilt with the wide side of tape on underside to ensure both edges are caught when top stitching on right side. Extra Wide Double Fold Bias Tape: Fabric cut on the bias (45 degree angle) with the raw edges folded under. The tape is then folded in half slightly off center. Used for binding, facing, accent trim, ties. To apply: fold over the raw edges of your fabric or quilt with the wide side of tape on underside to ensure both edges are caught when top stitching on right side. Wide Single Fold Bias Tape: Fabric cut on the bias (45 degree angle) with the raw edges folded under. Used for facings, casings, accents. To apply: top stitch down at the folded edge on both sides. Double Fold Quilt Binding: Fabric cut on bias (45 degree angle) with raw edges folded under. Tape is then folded in half slightly off center. Quilt binding is folded wider for binding quilted and bulky fabrics. Used for binding heavy fabrics and quilts. To apply: Fold over edge of your fabric or quilt with the wide side of tape on underside to ensure both edges are caught when top stitching on right side Hem Facing: Fabric cut on the bias (45 degree angle) with raw edges folded under. Used for facings and casings. To apply: open one fold and stitch to right side of fabric. Press and hand tack free edge. Maxi Piping: Cording encased in a fabric bias strip. Used for accent trim. To apply: insert in seam to define edges. Blanket Binding: 100% polyester woven edge satin, folded in half. Blanket b