Outdoors

About

EcoGrit's outdoor range covers the exterior oils, protectors and cleaners that keep Australian decks, pergolas and timber cladding sound through harsh UV, coastal salt and wet-dry seasons. It centres on three approaches. Penetrating oils such as WOCA Exterior Wood Oil feed the grain, never peel or flake, and recoat without sanding. Rubio Hybrid Wood Protector is a water-based colour and UV treatment that suits decking and vertical cladding alike. DuroGrit is a hard-wearing two-component coating built for high-traffic decks. Which one fits depends on your timber and how much wear it sees: dense, oily hardwoods absorb less product and need a thorough clean first, while a busy entertaining deck rewards DuroGrit's abrasion resistance. If you are weighing up options, our best decking oil for Australia guide compares durability, colour and recoat intervals side by side. How to choose an exterior finish Match the timber. Oily hardwoods like merbau and spotted gum absorb less oil and need a clean, dry surface to bond properly. Weigh wear against upkeep. Penetrating oils recoat easily with no sanding; DuroGrit lasts longer between coats but is a more involved two-part system. Prep first. Strip grey, dirt and mill glaze with Woca Exterior Wood Cleaner so the finish keys into sound timber. Colour and UV. More pigment slows greying and improves UV protection, at the cost of a less natural look. Buy the right volume. Coverage varies with species and porosity, so test a sample before committing to a full deck. Frequently asked questions How often do I need to recoat an oiled deck in Australia? Most exterior oils need a maintenance coat every one to two years, sooner on north- and west-facing decks that cop full sun. Penetrating oils make this simple: clean, dry and reoil with no sanding back. Our Australian summer test shows how different oils hold up. How do I apply decking oil? Work on a clean, dry, cool surface out of direct sun, applying thin even coats by brush, roller or pa