Banjo Fittings

About

Shop banjo fittings for compact brake, clutch, fuel, hydraulic, and power steering line routing. Evil Energy offers stainless steel metric banjo bolts and 3AN banjo adapters that help change the line exit direction where a straight connection may create clearance problems or unnecessary hose stress. Select by the connection on both sides, not by vehicle name or nominal diameter alone. Match the Banjo Adapter to Both Sides of the Connection For a hose connection, choose the 3AN banjo adapter with a 3AN 3/8‑24 UNF, 37° AN flare , then match the component side to a 10.2mm or 12.2mm banjo bore . Straight, 45°, and 90° options let you route the line according to available clearance. When replacing the hollow fastener, select the metric banjo bolt with two copper washers by M10 or M12 diameter, exact thread pitch, and listed length. Checking every dimension before ordering helps avoid cross threading, poor washer contact, and a forced hose angle. Compact Banjo Fittings for Brake, Clutch and Fuel Routing The Evil Energy 303 stainless steel 3AN banjo fitting is listed for brake, clutch, fuel, hydraulic, and power steering systems, with a published working pressure of 1,500 PSI and temperature range of −63°F to 252°F. The metric stainless steel banjo bolt listing covers fuel, oil, brake fluid, unleaded gasoline, methanol, and water. These low profile fittings are selection based components rather than universal fit parts, so confirm the port thread, banjo bore, angle, fluid, and complete system requirements before purchase. For additional routing components, browse Evil Energy AN fittings and adapters . Quick Fitment Check Need to connect a 3AN hose? Choose a 3AN male banjo adapter, then select the 10.2mm or 12.2mm bore and the straight, 45°, or 90° outlet. Need to replace the hollow banjo bolt? Choose the exact M10 or M12 thread diameter, thread pitch, and listed length. The metric single banjo bolt product includes two copper washers. Before ordering: Match the port, banjo