Band Saw

About

Band saw parts keep the blade tracking correctly around the upper and lower wheels. When a tire wears out, a guide bearing seizes, a thrust bearing groans, a belt slips, or a blade is dull, the saw can wander, vibrate, stall, or throw the blade off track. GenuineReplacementParts.com helps customers shop band saw replacement parts by model number, blade size, wheel size, and symptom. A band saw works by running a continuous loop blade around two or more wheels. The lower wheel is usually driven by a motor and belt or direct drive. The upper wheel helps control tracking and blade tension. Tires wrap around the wheels to grip the blade. Guide blocks, guide bearings, and thrust bearings keep the blade stable near the cut. The table, insert, fence, miter slot, guard, tension knob, tracking knob, switch, and dust port all support safe and accurate cutting. What are the most common band saw replacement parts? Blades, wheel tires, guide bearings, thrust bearings, belts, pulleys, table inserts, switches, knobs, blade guards, fences, and tension assemblies are common wear or service parts. Portable band saws may also use handles, triggers, battery contacts, and blade covers. Stationary shop models may need cabinet parts, doors, wheels, tires, and motor components. Blade tracking problems often begin with tires, tension, guides, or wheel alignment. If the blade slips off the wheel, inspect the tire condition, blade tension, tracking adjustment, and wheel bearings. If the saw cuts crooked, the blade may be dull, damaged, under-tensioned, or poorly guided. If the blade stops under load, look at the belt, motor, pulley, blade sharpness, and feed pressure. Band saw tires are especially important. A tire cushions the blade and helps it grip the wheel. Rubber tires may require adhesive on some machines, while urethane tires often stretch over the wheel. The tire diameter and width must match the wheel. A loose, cracked, hardened, or uneven tire can cause slipping, tracking trouble,