DuPont 2.0mm Cable Assemblies

About

DuPont 2.0mm Cable Assemblies — Keszoox Keszoox DuPont 2.0mm cable assemblies are pre-crimped wire harnesses built on a 2.00mm contact pitch , positioned between the standard 2.54mm DuPont pitch and the compact JST PH 2.0mm ecosystem. The 2.00mm pitch provides a 21% smaller PCB footprint than 2.54mm DuPont wiring while maintaining full compatibility with standard 2.0mm through-hole pin headers. All assemblies are manufactured with 24AWG stranded copper conductors , UL1007 PVC insulation , rated at 2A per conductor / 250V AC/DC , and are RoHS Directive 2011/65/EU compliant . Color-coded conductors across all pin counts (2 to 12 positions) simplify assembly identification and reduce wiring errors in production and prototyping environments. What Is a DuPont 2.0mm Connector? A DuPont 2.0mm connector is a generic, non-proprietary wire-to-board crimp connector with a 2.00mm (0.079 inch) contact pitch. The term “DuPont 2.0mm” is a colloquial trade name — not an IEC or EIA standard designation — widely used in the electronics industry to describe this connector family. The housing is made from UL94 V-0 rated nylon (PA66) with tin-plated brass or phosphor bronze crimp terminals. Unlike the Amphenol Minitek II (77138-series), the generic DuPont 2.0mm housing has no locking latch and relies on friction fit and terminal lance retention. Cable Assembly Types Available from Keszoox Reverse-Side-Head (Female–Female): Conductors exit opposite the latch — the standard PCB orientation for flat cable routing along the board surface. Most common configuration for PCB-mounted connector wiring. Same-Side-Head (Female–Female): Conductors exit same side as the latch — for enclosure-constrained routing where cables must exit toward the front panel or away from the PCB surface. Single-Head (Female Housing + Bare Tinned Leads): Female housing one end, pre-tinned bare leads other end — for direct PCB pad soldering, screw terminal connection, or custom termination. Pre-Crimped Terminal Cable —