No Stud TV Wall Mounts

About

Mount-It! no stud TV mounts are engineered to anchor securely into standard drywall without stud contact — using an industrial-grade toggle anchor system rated for TVs up to 100 lbs. Fixed, tilt, and low-profile options available for screens 32" to 85". No stud finder required. No wall demolition. Installation takes under 45 minutes with a drill and a level. All Mount-It! no stud TV mounts include: Pre-installed toggle anchor hardware rated beyond typical drywall anchors Wide anchor spread (16"+ between points) for even load distribution Compatible with standard VESA patterns from 75×75mm to 600×400mm Built-in level for precise horizontal alignment Cable management channel included Not sure which mount is right for your TV? Use the buying guide and FAQ below the products, or read our full no-stud installation guide → Which No Stud TV Mount Is Right for You? Not all no-stud installations are the same. Your TV's weight and how you want it to move determines which mount makes sense. Fixed (flat) mounts hold the TV flush against the wall — no tilt, no swivel. Lowest profile, lowest stress on the drywall anchors. Best choice if your TV is directly at seated eye level and you don't need to adjust the viewing angle. Tilt mounts allow 5°–15° of downward tilt, which is useful if you're mounting slightly higher than eye level — above a console, for example, or in a bedroom above a dresser. Tilt puts modest additional stress on anchors versus fixed, but remains safe within rated weight limits. Full-motion (articulating) mounts extend the TV away from the wall on an arm. In a no-stud installation, the arm creates leverage that multiplies the force on your anchors when extended. If you need a full-motion mount and cannot hit a stud, use a mount rated for at least 2× your TV's weight, and favor a shorter arm extension to minimize leverage. For TVs over 65 inches, we recommend hitting at least one stud or using a French cleat for full-motion installations. Weight and TV Size Compa