DIY Garage Floor Kits

About

Professional Grade DIY Garage Floor Epoxy That Gives You Time to Work One Stop Epoxy DIY Garage Floor Epoxy is a true two component, water based amine adduct epoxy made for homeowners, painters, and handymen who want a serious garage floor coating without moving into the faster application pace of a 100% solids contractor system. Each kit produces one full gallon of mixed coating, covers up to 200 square feet per coat, and provides a 1 to 2 hour pot life at 77 degrees Fahrenheit. The coating is self priming on properly prepared bare concrete and compatible existing coatings, comes in Light Gray or Tan, and can be installed as a solid color floor or finished with decorative vinyl flakes and a compatible urethane topcoat. Two coats are recommended over bare concrete for the most consistent color, sheen, and finished film build. Quick answer: This is the middle ground between a convenience first retail coating and a higher build 100% solids professional system. It gives DIY installers published coverage, a manageable pot life, manufacturer approved preparation options, and direct technical support from people who work with epoxy floors every day. Shop One Stop Epoxy Garage Floor Coating or continue below to compare the technical data, calculate how many kits you need, and decide whether a solid color or decorative flake floor is right for your garage. Compare the Numbers, Not the Box Garage floor products sold through retail stores vary widely. Some are one component coatings, some are two component epoxies, and others use different resin chemistry. The fairest way to compare any DIY garage floor kit is to look past the front of the package and check the coating type, solids by volume, coverage per coat, dry film thickness, pot life, surface preparation requirements, and available technical support. What to Compare One Stop Epoxy DIY Coating Why It Matters Coating chemistry Two component water based amine adduct epoxy Part A and Part B chemically crosslink to form the