Grounding Products

About

Grounding Products Tyco connector This all-stainless steel grounding lug is like a split bolt with a mounting stud, and can be used on most modules and mounting rails. The mounting stud is #8 and comes with a star washer captive on the nut. It takes #6 or #8 solid copper ground wire. Use this grounding lug where corrosion is a consideration. Listed to UL 467. Description Item code Tyco Grounding Connector 051-03420 Lay-in lugs These UL Listed tin-plated copper lugs have stainless steel set screws and come with either stainless steel thread forming screws and lock washers, or a longer thread cutting stainless steel screw with stainless steel star-washer captive on the nut. Consult the module manufacturer's installation guide to see which type(s) meet NEC requirements for connecting a continuous ground wire to that module. Sold in packages of 10. Description Item code Bag of 10 lay-in lugs w/ screws 051-03414 Bag of 10 lay-in lugs w/ long screws and nuts 051-03418 Wiley WEEB Grounding Products Washer, electrical equipment bonding WEEB products are used to bond solar modules to aluminum solar mounting rails. This replaces the lay-in lug and ground wire to each module since the mounting rails can be wired to an equipment grounding terminal in the inverter or disconnect, grounding the entire assembly. This meets the requirements of UL 467 while streamlining the installation process. ETL listed to UL standards. WEEB-9.5 The WEEB-9.5 is used for bonding modules to mounting structures when the modules are directly bolted to the rails using ¼ bolts through the mounting holes on the rear of the module frames. This type of mounting is typical on DPW systems (see Mounting Systems) and on Wattsun and Zomeworks trackers. The WEEB-9.5NL is used for bonding strong-back structure and legs to the rail where 3/8 bolts are used. Sold in packs of 10. WEEB-UMC WEEB UMC grounding clips are used between modules and Unirac SolarMount Standard Rails when front mount clamps are used to hold t