Siser Stripflock Pro - Heat Transfer Vinyl

About

Siser's StripFlock Pro is a heat transfer vinyl that gives designs a suede textured look with a raised feel. With the wide variety of color options and the ability to layer, this product will give you the unique look, you desire! Just like the classic version, StripFlock® Pro can also be layered on top of itself, for even more dramatic effects! 12" width material 410 micron/16.1 mil thick Can be layered Suede Texture Pressure sensitive liner Adds value and style to garments A smaller PVC composition, free from any Phthalates CPSIA Certified 311° F 10 - 15 seconds with 10 second re press if design lifts after initial press Peel Warm Medium pressure Cut in reverse 100% cotton, 100% polyester, Poly/cotton blends, leather Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean. Additional Instructions Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended. 1. Gram Force: 10 2. Speed: 30 cm/s 3. Tool: CB09U+0 *VTSuses a 45 Degree Blade Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Flocked Blade: 4 Speed: 5 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard) Cut Settings for Roland GS/GX-24: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Blade: 45 degree Gram Force: 80-120 Offset: .250 Speed: 30 cm/s Cut Settings for Scan N Cut: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Blade: Standard, 4 Cut Speed: 1 Cut Pressure: 2 Cut Settings for Titan: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Blade: 45 degree / 60 degree Gram Force: 100-110 Speed: 180 mm/s