Mixed Bed Resin

About

Mixed bed resin is a blend of two ion exchange resins in one bag: cation and anion beads, pre mixed in the right ratio. Water passing through the bed gives up its dissolved minerals and comes out deionised at 0 ppm. It is the final stage in almost every pure water setup, whatever the water is for. Every bag here is virgin resin, blended once and never regenerated, which is what gives a fresh fill its full capacity. The 25 litre bags come from FaceLift, Unger and Tulsion MB115, and Unger HydroPower owners are covered with the DI Ultra packs and 2 litre replacement bags made for those systems. Window cleaning: fills the DI stage of a water fed pole system, from a single DI Resin Vessel in a soft water area to the polishing stage after an RO membrane in a hard one. Aquarium RODI: the same chemistry sold in small pouches for reef keeping. A 25 litre bag refills a Refillable Resin Cartridge or DI pouch many times over, at a fraction of the per litre price. Spot free rinsing: detailers use deionised water the same way window cleaners do. Water at 0 ppm dries on paint and glass without water marks. Custom PC loops: deionised water is the usual base for a watercooling loop, and a small DI vessel produces it on tap. The practical points are the same whatever you use it for. Mixed bed resin is single use, so check the output with a Handheld TDS Meter and change the bed once the reading starts to climb. In hard water areas an RO membrane in front makes each fill last far longer. A Blue Resin Funnel keeps the swap tidy. Free courier delivery on orders over £75 ex VAT, which all three 25 litre bags clear on their own.