Yamaha Filters & Strainers

About

Yamaha Filters & Strainers If you’re searching for an outboard fuel filter , Yamaha outboards typically use staged filtration – multiple filters working together from the fuel tank to the injectors. Replacing the right filter at the right interval helps prevent hard starts, hesitation, power loss, and expensive fuel-system repairs. YamahaOnlineParts.com stocks a wide selection of OEM Yamaha filters and strainers for your outboard, including 10-micron fuel/water separating filters, primary fuel filters, in-line fuel filters, VST filters, oil filters, and filter wrenches. Outboard fuel filter quick guide Filter type Where it is What it does Service guidance 10-micron fuel/water separating filter In the fuel line between the tank and engine Removes water and fine debris before fuel reaches the engine Replace after every 50 hours of engine operation or after a bad tank of gas Primary on-engine fuel filter Typically on the front, side, or rear of the powerhead Provides backup filtration and includes a small water trap Replace after every 100 hours of engine operation VST filter Attached to the electric fuel pump in the Vapor Separator Tank Filters fuel again before it is pressurized to the fuel rail Have a dealer inspect and/or replace after every 300 hours when upstream filters are maintained properly In-line fuel filter On some models, between the primary fuel pump and VST and/or between the VST and the fuel rail Catches debris before fuel reaches the high-pressure side Location and service interval vary by model; check the owner’s or service manual Pro tip: Do not remove a used 10-micron separator, dump the fuel out, and reinstall it. That can move trapped debris and water to the clean side of the filter and back into the fuel system. Shop by filter category Yamaha Primary Fuel Filters Yamaha Fuel/Water Separating Filters & Wrenches Yamaha In-Line Fuel Filters Yamaha VST Fuel Filters & Gaskets Yamaha Oil Filters & Wrenches Need more parts while you’re