Flexible Solar Panels

关于

Sunman eArc® flexible panels are glassless "solar skin" modules — about 2 mm thick and roughly 70% lighter than a comparable framed panel — so they can be bonded straight onto a curved caravan roof, a bimini or a boat deck where a rigid panel will not fit. They are certified to the same IEC 61215 and IEC 61730 standards as framed panels, and every junction box is IP68 rated with MC4 solar connectors. Which flexible panel do I need? Match the panel to the space you have on the roof first, then check the current your charge controller can take. Panel Power Size (L × W × H) Weight Vmp / Imp 100 W Sunman eArc 100 W 1219 × 546 × 2 mm 2 kg 18.9 V / 5.29 A 175 W Sunman eArc 175 W 1504 × 673 × 2 mm 3 kg 19.5 V / 8.98 A 215 W Sunman eArc half-cut 215 W 1615 × 710 × 2 mm — 21.08 V / 10.67 A 430 W Sunman eArc 430 W 2054 × 1080 × 2 mm 7.2 kg 42 V / 10.24 A Heights exclude the junction box. The 215 W panel uses a half-cut cell layout that splits the module into two independent strings, so shade falling on one side costs you less output — worth having where a mast, aerial or air-conditioner shadow tracks across the roof. Mounting and wiring Bond to the roof with high-bond double-sided tape or structural adhesive, or bolt through the eyelets — no rails and no roof penetrations needed for the panel itself. A vented gap kit lifts the panel a few millimetres off the surface, which keeps it cooler and lifts output on hot days. Bring the cable inside through an IP68 gland, and size the run for about 3% voltage drop. Pair the panel with an MPPT charge controller rated above the panel's short-circuit current. Complete your system Solar panel mounts and cable glands — adhesive and mechanical mounting options plus IP68 roof cable entries. Solar cable, MC4 connectors and fuses — correctly sized cable for the run to your controller. MPPT solar charge controllers — Victron, Phocos and SRNE, sized to your battery bank. Rigid framed solar panels — if your roof is flat and you have the room, a f

页面 SEO