Double-sided Clear Transparent Acrylic Foam Adhesive Tape
MD DC PRINT 的集合页
关于
Description Clear, acrylic construction for joining transparent material. Adhesive Type: Acrylic Tape Thickness w/o liner :1mm Temperature Resistance Minutes Hours: 300°F(149°C) Days Weeks: 200°F(93°C) Solvent Resistance: High Application Ideas Seal skylight inner/outer dome. Mount back lit translucent signs. Edge-bond resin filled glass. Application Techniques Clean: Most substrates are best prepared by cleaning with a 50:50 mixture of isopropyl alcohol (IPA*) and water. Exceptions to the general procedure that may require additional surface preparation include: • Heavy Oils: A degreaser or solvent-based cleaner may be required to remove heavy oil or grease from a surface and should be followed by cleaning with IPA/water. • Abrasion: Abrading a surface, followed by cleaning with IPA/water, can remove heavy dirt or oxidation and can increase surface area to improve adhesion. • Adhesion Promoters: Priming a surface can significantly improve initial and ultimate adhesion to many materials such as plastics and paints. • Porous surfaces: Most porous and fibered materials such as wood, particleboard, concrete, etc. need to be sealed to provide a unified surface. • Unique Materials: Special surface preparation may be needed for glass and glass-like materials, copper and copper containing metals, and plastics or rubber that contain components that migrate (e.g. plasticizers). *Note: These cleaner solutions contain greater than 250 g/l of volatile organic compounds (VOC). Please consult your local Air Quality Regulations to be sure the cleaner is compliant. When using solvents, be sure to follow the manufacturer’s precautions and directions for use when handling such materials. Pressure: Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure develops better adhesive contact and helps improve bond strength. Typically, good surface contact can be attained by applying enough pressure to insure that the tape experiences ap